10
C O N N E C T I N G T H E S P E A K E R S
For All Models
Choosing Cable
We recommend minimum 16-gauge high-quality
speaker cable or thicker for runs up to 25 feet (8m) and
12-gauge wire or thicker for longer runs. (We use a
custom-confi gured 12-gauge oxygen-free cable in our
crossover networks.)
Connecting with Bare Wire
Insert bare wire into holes and tighten.
Connecting with Banana Plugs, Spade Lugs, or Pins
The binding posts accept standard banana plugs and
pins, and can accommodate 5/16” or larger spade lugs.
Warning!
To prevent electrical shock, always switch off
the amplifi er or receiver when making connections to
the speaker system.
Connecting the XA75LE
Basic Connections
✦
Keep the speaker terminal jumper straps in place.
✦
When making connections, be sure to c to +
(red) and – to – (black).
XA75LE
amplifier or receiver
surround processor
speaker terminal
jumper straps
LFE
input
sub
out
Connecting the XA 55cr
Connecting the XA 55cr to a Surround Processor
✦
Select the ”small” or ”normal” setting on your
receiver or processor for the center channel. This
routes all bass information (typically below 120Hz)
to the subwoofers of the XA75LE.
✦
When making connections, be sure to c to +
(red) and – to – (black).
Match the sound levels of each speaker.
✦
Your home theater system most likely includes a test
signal that simplifi es level matching. Refer to the
instructions provided with these electronics.
surround sound receiver or amplifier
left front center front right front
XA55cr
