8
I N S T A L L A T I O N
Mark the outline of the installation hole using the supplied template. Make a small hole at the center of the speaker
location. Insert a long, bent piece of wire and rotate it to confi rm that there are no obstructions behind the location.
Warning:
Do not overtighten the screws.
Cut the installation hole. Run the wire from the amplifi er location to the cutout. Allow for an extra foot of wire at the
cutout.
Strip 1/2-inch (13mm) of insulation from the wire, and twist the wire strands together. The speaker jack will accept
either bare wire up to 12-gauge or single banana plugs. Connect the wire to the speaker.
Slide the speaker into the cutout. Tighten the four Phillips mounting screws. The mounting arms will pivot into posi-
tion and clamp the speaker to the mounting surface.
