Snell IQSDA30 User Instruction Manual Download Page 22

Page: 22 / 27

IQSDA30/IQSDA32

www.snellgroup.com

Controlling the IQSDA30/32 from the RollCall Control Panel

Issue 2 Rev 3

Page 22

2015 Snell Limited

5.4.1 Log Field Descriptions

Log Field

Description

SN=

Displays the module serial number, which consists of an S
followed by eight digits.

OS_VERSION=

Displays the operating system name and version.

BUILD_NUMBER=

Displays the build number.

HARDWARE_VERSION=

Displays the hardware version number.

UPTIME=

Displays the time since the last restart in the format
ddd:hh:mm:ss.

LICENSED_OPTIONS=

Displays the licensed features installed in the module.

INPUT_N_IDENT=

Displays the identifier of the serial data input.

INPUT_N_NAME=

Displays the name of the serial data input.

INPUT_N_TYPE=

This displays the type of input as specified by the unit’s
configuration. Valid values are HD /SD SDI.

INPUT_N_STATE=

Displays the current input state. Valid values are:

•

WARN

•

FAIL

INPUT_N_SDRATE=

Displays the current bit rate for the serial data input.

Summary of Contents for IQSDA30




























Search results

Summary of Contents for IQSDA30

Reviews:

Related manuals for IQSDA30

Brands by name

Popular brands

Snell IQSDA30, User Instruction Manual

Search results

Summary of Contents for IQSDA30

Reviews:

Related manuals for IQSDA30

Brands by name

Popular brands