IQAES00/01/10/11
N33
IQAES00OPS 27/07/06
www.snellwilcox.com
Version 1 Issue 1
N33.25
Setup…
This allows various functions to be setup.
Setup
Mode
Non PCM Detect
Software Version
Serial No
Preset Unit
Restart
Build No
Mode
These modules can be configured to provide up to
10 reclocked outputs for a single input or up to 5
outputs per input for 2 inputs.
Mode
1 Input
2 Inputs
1 Input
When selected all outputs will derive their input
signal from Input 1.
2 Inputs
When selected AES Outputs 1 will derive their
input signal from Input 1 and AES Outputs 2 will
derive their input signal from Input 2.
Non PCM Detect
The non-PCM detector may be set to respond to
the channel status bits as follows :
Non PCM Detect
Test nAUDIO
Test V bit
Test Audio bit
When selected and the Audio bit is found to be set
to non-audio it will be considered as non-PCM.
Test V bit
When selected and this bit is found to be set to 1
(non-valid) it will be considered as non-PCM.
Note that this is an OR function so if both items are
selected and one of the test bits are considered to
be non-PCM, the detector will report the signal as
being non-PCM.
If neither items are selected the detector will be
disabled.
This information will be reported to the logger
(nonPCM) if selected, and sent as a RollTrack
(Input non-PCM) if selected.
Software Version
This item reveals a display showing the version of
the software fitted in the module.
Software Version
Software Version
x.x.x
OK
Select OK to return to the Unit Menu.
Serial No
This item reveals a display showing the serial
number of the module.
Serial No
Serial No
xxxxxxx
OK
Select OK to return to the Unit Menu.
