Snell ES-103, Operating Manual And Spare Parts List

Page: 5 / 44

AS-23-33 2019.06
5
Control elements
Main switch
“1” Power ON.
“0” Power OFF
Length knob
The length of the strap be fed out can be pre-set automatically by adjusting the knob.
Reset push button switch
Aggregate start a cycle.
Feed push button switch
To feed strap out of machine freely.
Power plug
To be connected to a power source.
1.
Strap dispenser
A roll of strap is mounted here.
2.
Brake arm
Prevent over-ration of the strap reel
3.
Strap guide for brake
The strap is threaded through this guide
4.
Idle strap guide
The strap is passed through this guide
5.
Strap insertion inlet
The free end of the strap should be inserted here to initiate the tensioning and cutting cycle.