background image

SHDSDA2

OPERATION

SHDSDA2

Version 1 Issue 3

 

030402

2

Introduction to this Operation Manual

This manual covers the operation and use of the modules described below.

WARNING…
THE FRONT PANEL OF THE UNIT MUST NOT BE
OPENED BY THE OPERATOR. ACCESS IS ONLY
PERMITTED 

TO 

FULLY 

QUALIFIED

INSTALLATION ENGINEERS.

System HD Modules must only be installed and/or replaced by qualified service personnel, with reference to
the System HD Installation guide. Refer all installation and servicing to qualified personnel only.

Manufacturers Notice

Copyright  protection  claimed  includes  all  forms  and  matters  of  copyrightable  material  and  information  now
allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from
the software programs which are displayed on the screen such as icons, screen display looks etc.

Reproduction or disassembly of embedded computer programs or algorithms is prohibited.

No  part  of  this  publication  may  be  transmitted  or  reproduced  in  any  form  or  by  any  means,  electronic  or
mechanical, including photocopy, recording or any information storage and retrieval system, without permission
being granted, in writing, by the publishers or their authorised agents
.

Important Notice

No  responsibility  is  taken  by  the  manufacturer  or  supplier  for  any  non-compliance  to  EMC  standards  due  to
incorrect installation.

Information  in  this  manual  and  software  are  subject  to  change  without  notice  and  does  not  represent  a
commitment  on  the  part  of  Snell  &  Wilcox  Ltd.  The  software  described  in  this  manual  is  furnished  under  a
licence agreement and may not be reproduced or copied in any manner without prior agreement with Snell &
Wilcox Ltd. or their authorised agents.

Summary of Contents for SHDSDA2E-S1












Reviews: