IQBADX
SECTION 28c
IQBADXOPS
050804
www.snellwilcox.com
Version 1 Issue 5
28c.18
◀
◀
◀
◀
Set_Default_Output
The outputs are always active. In the event of an
extraction failure (due to there being no data at the
targeted address) an internally generated signal
may be selected as the output for both Output A or
Output B.
Selections are as follows:
◀
◀
◀
◀
Silence
◀
L/R_Tone
(Left = -20 dBFS at 1 kHz
Right = -20 dBFS at 500 Hz+2 kHz
mixed)
◀
-20dBFS_L/R_Tone
◀
◀
◀
◀
-20dBFS_1KHz
◀
◀
◀
◀
-20dBFS_500Hz
◀
◀
◀
◀
-20dBFS_250Hz
◀
◀
◀
◀
-60dBFS_1KHz
◀
◀
◀
◀
-1dBFS_1KHz
◀
◀
◀
◀
0dBFS_1KHz
Preset setting is to silence.
◀
◀
◀
◀
Tone_Output
An internally generated tone signal may be
selected as the output for Output A, B, C or D.
◀
L/R_Tone
(Left = -20 dBFS at 1 kHz
Right = -20 dBFS at 500 Hz+2 kHz
mixed)
◀
◀
◀
◀
-20dBFS_1KHz
◀
◀
◀
◀
-20dBFS_500Hz
◀
◀
◀
◀
-20dBFS_250Hz
◀
◀
◀
◀
-60dBFS_1KHz
◀
◀
◀
◀
-1dBFS_1KHz
◀
◀
◀
◀
0dBFS_1KHz
Preset setting is L/R_Tone.
◀
Names
Default names are given to the outputs and the
possible embedded inputs which are little more
than relative descriptions. These names may be
edited to provide more meaningful information
related to the equipment installation.
To edit a name select either
◀
◀
◀
◀
Output_Names
or
◀
◀
◀
◀
Input_Names
or
◀
◀
◀
◀
Preset_Names
(returns to default names)
Selecting
Input Names
will reveal a menu that
allows an input location to be selected i.e.
Select the desired location (this will reveal an
editing window) and edit the name using the
spinwheel/push buttons. (Use same method as for
naming the memory names)
Selecting
Output Names
will reveal a menu that
allows an output location to be selected i.e.
Select the desired output (this will reveal an editing
window) and edit the name using the
spinwheel/push buttons. (Use same method as for
naming the memory names)