![background image](http://html1.mh-extra.com/html/snell-and-wilcox/iqbadx-2-b/iqbadx-2-b_manual_1309060015.webp)
IQBADX
SECTION 28c
IQBADXOPS
050804
www.snellwilcox.com
Version 1 Issue 5
28c.15
OPERATION FROM AN ACTIVE CONTROL PANEL
The card may be operated with an active control panel via the RollCall™ network.
The menus available for this card are shown on page opposite and will appear in the Control display window.
Operational details for the remote control panel will be found in SECTION 1 of the Modular System Operator's
Manual.
MENU DETAILS
(see IQBADX Menu System Opposite)
MAIN MENU
The main, or top level menu allows various sub-
menus to be selected by pressing the button
adjacent to the required text line.
Note that where a menu item is followed by three
dots (...) this indicates that a further sub-menu may
be selected.
Whenever a menu item is selected the parameters
of that selection will be displayed in the Information
window of the front panel. Where the selection is
purely a mode selection and does not enable a
sub-menu, the text will become reversed (white-on-
black) indicating that the mode is active. If the
mode is not available for selection the text will
remain normal.
◀
◀
◀
◀
Outputs
The outputs can be set to any of the eight possible
embedded audio addresses, or can be fixed to an
internally generated test signal (tone or silence).
Display
▶
▶
▶
▶
The status of the embedded data on the input D1
stream (select
Embedded_D1
), and the extractor
outputs (select
Audio_Outputs
) may be monitored
here.
The information to be displayed in the LCD
window.
◀
◀
◀
◀
Extract
An output may be selected and various processes
applied to that output.
This menu allows the left and right channels to be
inverted and, using the Extract function,
the output channels may be reformatted.