17
TIP
: The beep slider sets a tone to indicate that the printer has completed a print, this can be useful
when you are setting your delay value. A beep before the box has passed the print head indicates your
device is printing early and a beep after the box has passed the print head indicates late printing.
7.
Encoder
–
An encoder is a device that allows the printer to read line speed in real
time. This is an optional peripheral device, if you have not purchased one make sure
to set the encoder slider to the off position
-
Pulses per revolution
(PPR):
the default setting for the Sneed Coding
approved encoder kit is 2500 ppr
-
Wheel diameter: the default setting for the Sneed Coding approved
encoder kit is 50mm
(
….)
8.
Repeat
–
This feature allows for multiple prints from a single print trigger. This
is useful when you would like to print multiple times on the same package
-
To activate, tap the slider and set the number prints. Repeat Interval
will set the distance between each print
9.
UV light
–
Set your UV light for UV curable inks.
Sneed Coding does not currently
offer any UV curable inks
