SNDWAY SW-6510S, User Manual

Page: 7 / 36

- 05 -
4 Charging and maintenance of lithium battery
3.1 Main Display Interface
After the instrument is turned on, it will automatically enter the
main display interface, as shown in the following figure:
1) Coupling state: the coupling state between the probe and
the workpiece to be measured
2) Measurement mode: display the current measurement mode
3) Unit system: mm (in metric system), or in (in imperial system)
4) Battery power: Display of remaining battery power
5) Sound indication: alarm sound switch display
6) Information display: display thickness measurement value,
measurement material, sound speed, maximum, minimum,
average;
The product is powered by a built-in 3.7V 2000mAh lithium
battery, which is not removable. When the product cannot be
turned on or the battery is empty after turning on, please
charge it in time. Please use a DC5V, more than 1A charging
adapter to charge the product, and the charging port is Type-C.
While charging, the battery symbol scrolls to display.
When fully charged, the battery symbol becomes full.
mm
4.42
Scan
Mat：
5920
Custom 1
4.50mm
Max
4.42mm
Min
4.43mm
Avg
1
5
4
3
6
2