- 08 -
Figure 2. Smear the couplant evenly, and tightly couple the
probe to the surface of the material to be tested.
Apply the couplant evenly to the measured area, then couple
the probe to the workpiece and move it along the surface of the
workpiece. The instrument will display the current value,
maximum value, minimum value and average value of the
measurement in real time.
7.3 Continuous measurement
7.4 Alarm measurement
The user can monitor the material with poor quality through the
alarm function. Press and hold to turn the alarm on or off.
The displayed on the screen means to open the alarm
measurement, and the displayed on the screen means to
close the alarm measurement.
For example:
Alarm setting: Standard value: 4.00mm
Tolerance limit: ±0.1mm (Refer to "7.19 Alarm Setting" for alarm
setting) When the measured thickness is less than 3.90mm or
greater than 4.10mm, the instrument will continuously issue a
Summary of Contents for SW-6510S
Page 35: ......
