SNBC BT-T080, Programming Manual

Page: 53 / 89

BT-T080 Programming Manual
- 47 -
4 CODE39 1 ≤ k ≤ 255 45 ≤ d ≤ 57, 65 ≤ d ≤ 90, 32, 36, 37,43
5 ITF 1 ≤ k ≤ 255 48 ≤ d ≤ 57
6 CODABAR 1 ≤ k ≤ 255 48 ≤ d ≤ 57, 65 ≤ d ≤ 68 , 36, 43, 45,46,47,58
65 UPC-A 11 ≤ n ≤ 12 48 ≤ d ≤ 57
66 UPC-E 11 ≤ n ≤ 12 48 ≤ d ≤ 57
67 JAN13 (EAN13) 12 ≤ n ≤ 13 48 ≤ d ≤ 57
68 JAN 8 (EAN8) 7 ≤ n ≤ 8 48 ≤ d ≤ 57
69 CODE39 1 ≤ n ≤ 255
45 ≤ d ≤ 57, 65 ≤ d ≤ 90, 32, 36, 37,43
d1 = dk = 42
70 ITF 1 ≤ n ≤ 255 48 ≤ d ≤ 57
71 CODABAR 1 ≤ n ≤ 255 48 ≤ d ≤ 57 65 ≤ d ≤ 68, 36, 43,45,46,47 58
72 CODE93 1 ≤ n ≤ 255 0 ≤ d ≤ 127
②
73 CODE128 2 ≤ n ≤ 255 0 ≤ d ≤ 127
[Note ① ]
• This command ends with a NUL code.
• When UPC-A or UPC-E is selected, the characters after the first 12 bytes will be
processed as normal characters after receiving12 bytes of barcode data.
• When JAN13 (EAN13) is selected, the characters after the first 13 bytes will be
processed as normal characters after receiving 13 bytes of barcode data.
• When JAN8 (EAN8) is selected, the characters after the first 8 bytes will be
processed as normal characters after receiving 8 bytes of barcode data.
• The number of data for ITF barcode must be even numbers. When an odd number of
data is input, the printer ignores the last received data.
[Note ] ②
• n indicates the number of barcode data, and printer processes the following n bytes
as barcode data.
• If n is outside of the specified range, the printer stops command processing and
processes the following data as normal data.
[Note (standard mode)]
• If d is outside of the specified range, this command is disabled.
• If the horizontal size exceeds printing area, the command is disabled.
• This command feeds paper for a distance that equals to the set height of barcode,
regardless of the line spacing specified by ESC 2 or ESC 3 .
• This command is enabled only when no data exists in the print buffer. When data
exists in the print buffer, this command is ignored.
• After printing barcode, this command sets the print position to the beginning of the
line.
• This command is not affected by print modes (bold, double-strike, underline,
character size, white/black reverse printing, or 90° rotated character,etc.), except for
upside-down printing mode.
[Note (page mode)]