Snapper ZF2200K, ZF2500K, ZF2500KH, ZF, Parts Manual

Page: 35 / 48

35
73” MOWER DECK ASSEMBLY
ITEM PART NO. DESCRIPTION
1 9-1822 SCREW, 1/2-13 x 5” Hex Head Cap (2)
2 2-9264 GAGE WHEEL (2)
3 3-6456 SPACER, Gage Wheel (2)
4 9-1325 NUT, 1/2-13 Hex Nyloc (5)
5 9-1541 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap (2)
6 4-4839 CAP, Caster Shaft (2)
7 2-1960 SPACER (6)
8 4-4892 BEARING, Flanged Radial 1 x 2 x 23/32” Double Seal (4)
9 2-3747 BUSHING, Machine 1” I.D. (4)
10 4-4646 WELDMENT, Gauge Wheel Caster (2)
11 9-1617 SCREW, 3/8-16 x 6” Hex Head Cap (2)
12 7-9868 ROLLER, 3-3/4 x 4-13/16” Nylon (2)
13 7-9882 TUBE, Axle (2)
14 9-1299 NUT, 3/8-16 Hex Nyloc (6)
15 3-6461 ROD, Threaded Roller
16 3-6460 TUBE, Roller
17 9-1884 SCREW, 1/2-13 x 1-1/2” Hex Head Cap
18 2-7327 WELDMENT, Pivot Pin
19 7-9226 ROLLER, Low Density Polyethylene (3)
20 2-7344 WASHER, 5/8” SAE Flat (2)
21 1-7711 PIN, 7/16” Linch (2)
22 1-9152 SPACER, Caster (12)
23 2-3556 BUSHING, Caster (6)
24 4-6523 WELDMENT, Caster Yoke (2)
25 7-6998 FITTING, 1/4-28, Straight, Grease (3)
26 9-1326 SCREW, 1/2-13 x 5-1/2” Hex Head Cap, Grade 5 (2)
27 2-2151 SLEEVE, Axle (2)
28 2-9869 ASSEMBLY, Wheel/Tire (2) (includes items 29-34)
29 2-9870 TIRE, 9 x 3.50-4, 4 Ply Smooth
30 2-9871 RIM, One Piece Steel, White
31 2-2394 BEARING, Flanged (2)
32 2-2395 BEARING, Roller (not shown)
33 1-2234 VALVE, Air
34 4-6430 FITTING, 1/4-28, 45 Degree, Grease
35 5-7779 GROUP, Spindle (3) (see page 24 for parts breakdown)
36 4-7139 WELDMENT, Chute Deflector
37 2-9277 HINGE PIN, Chute
38 9-1313 PIN, 3/32 x 1” Cotter
39 2-7950 SPRING, Chute
40 4-6624 GEARBOX, Right Angle 1.5:1
41 9-1304 SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (4)
42 1-3857 KEY, 1/4 x 7/8” Woodruff (2)
43 4-6889 PULLEY, Cast 5.95 O.D.
44 5-7863 DRIVESHAFT, Telescoping
45 9-0132 SCREW, 3/8-16 x 3/8” Set (2)
46 9-1802 SCREW, 5/16-18 x 5/8” Socket Head Set (2)
47 4-2619 WELDMENT, Idler Arm
48 3-2031 WASHER, 1-1/32 I.D. x 1-1/4” O.D. Flat
49 1-2709 E-RING, 1”
50 9-1305 SCREW, 3/8-16 x 2” Hex Head Cap, Grade 5
51 9-1300 WASHER, 3/8” Flat
52 3-5789 PULLEY, 5-1/2” O.D. Idler
53 9-1553 SCREW, 3/8-16 x 1-3/4” Hex Head Cap, Grade 5
54 9-1331 WASHER, 13/32 I.D. x 1-1/2” O.D. Flat
55 3-5667 SPRING, Extension
56 3-5858 SPACER, 1/2 I.D. x 3/4” O.D. x .83
57 4-6891 BELT, 152” HB Section
58 4-6644 GUARD, Pulley (2)
59 9-1922 NUT, 1/2-13 Hex Light Nyloc (2)
60 2-3735 KNOB (6)
OUT FRONT ZTR SERIES 0 MANUAL No. 06106