background image

Safety Instructions

These instructions are for your safety. Read them 

carefully.

  WARNING!

  THIS CUTTING MACHINE 

CAN AMPUTATE HANDS AND FEET AND 

THROW OBJECTS. FAILURE TO OBEY 

THE FOLLOWING SAFETY INSTRUCTIONS 

COULD RESULT IN SERIOUS INJURY OR 

DEATH.

  WARNING!  

CHILDREN CAN BE 

SERIOUSLY INJURED OR KILLED BY THIS 

EQUIPMENT. Carefully read and obey all the 

safety instruction that follow.

IMPORTANT INFORMATION  

The American 

Academy of Pediatrics recommends that 

children be a minimum of 16 years of age 

befor

e

 operating a riding 

lawn mower.

Protecting Children

Tragic accidents can occur if the operator is not 

alert to the presence of children. Children are 

frequently attracted to the machine and the 

mowing activity. 

Do not

 think that children will 

stay where you last saw them.

•  Keep children out 

of the mowing area 

and in the watchful 

care of a responsible 

adult 

other than

 the 

operator.

•  Be alert and turn 

machine off if a child 

enters the area.

• 

Before and while backing, look behind and 

down for small children.

• 

Do not carry 

children, even with 

the blades shut off. 

They can fall off and 

be seriously injured 

or interfere with safe 

machine operation. 

Children who have 

been given rides in the past can suddenly come 

into the mowing area to ride again and be run 

over or backed over by the machine.

•  Do not let children to operate the machine.
• 

Use extreme care when going near blind 

corners, shrubs, trees, or other objects that can 

block your view of a child.

General Operation

• 

Read, understand, 

and obey all 

instructions on the 

machine and in 

the manual before 

starting.

•  It is recommended 

that someone knows 

that you are mowing and can give aid if there is 

an injury or accident.

• 

Those who operate, maintain, and/or service 

this machine must first read and understand this 

Operator Manual. Local laws can regulate the 

age of the user. The owner is responsible for 

training the users of this equipment.

• 

The owner and operator of this equipment 

can prevent accidents and is responsible for 

accidents or injuries occurring to themselves, 

other persons and/or property.

•  Do not put hands or feet near rotating parts 

or under the machine. Keep away from the 

discharge opening at all times.

• 

Only let responsible adults, who are familiar 

with the instructions, to operate the machine.

•  Clean the area of 

objects such as 

rocks, toys, wire, 

etc., which could 

be picked up and 

thrown by the 

blades.

•  Be sure the area 

is has no bystanders before operating. Stop 

machine if someone enters the area.

• 

Do not mow in reverse unless fully necessary. 

Always look down and behind before and while 

backing.

•  Do not point discharged material toward 

someone. Avoid discharging material against a 

wall or obstruction. Material can ricochet back 

toward the operator. Stop the blades when 

going across gravel surfaces.

•  Do not operate machine without the full grass 

catcher, discharge guard, or other safety 

devices in place and working.

•  Slow down before turning.
• 

Always turn off blades, move the steering 

control lever out to the park brake position, stop 

engine and remove keys before dismounting.

• 

Do not carry passengers. The machine is only 

intended for use by one person. 

• 

Operate the machine only in daylight or good 

artificial light.

7

SAFETY

Summary of Contents for SZ2042









































































Reviews: