Operation
17
Operation
Figure 4. Seat Adjustment
A. Seat Adjustment Lever
Seat Adjustment
See Figure 4. The seat can be adjusted forward and
backward. Move the lever towards the left, position the seat
as desired, and release the lever to lock the seat into
position.
Mowing Height Adjustment
The cutting height adjustment pin (A, Figure 5) controls the
mower cutting height. The cutting height is adjustable
between 1-3/4” (4,4 cm) and 5” (12,7 cm) in 1/4” (0,64 cm)
increments.
1. Depress the deck lift foot pedal (B) until it locks into the
5” (12,7 cm) position.
2. Place the cutting height adjustment pin in the desired
cutting height.
3. Depress the deck lift foot pedal then push the lock lever
(C) towards the right to release the lock.
4. Release the deck lift foot pedal until it comes to rest
against the cutting height adjustment pin.
C
Figure 5. Mowing Height Adjustment
A. Cutting Height Adjustment Pin
B. Deck Lift Foot Pedal
C. Deck Lift Lock lever
A
Tire
Pressure
Front
25 psi (1,72 bar)
Rear
15 psi (1,03 bar)
Figure 3. Checking Tire Pressure
Check Tire Pressures
Tire pressure should be checked periodically, and
maintained at the levels shown in the chart. Note that these
pressures may differ slightly from the “Max Inflation”
stamped on the side-wall of the tires. The pressures shown
provide proper traction, improve cut quality, and extend tire
life.
A
B
