Snapper IMAGE 204094, Operating Manual, Page: 7 / 12

OPERATION
On/Off, Volume and Tone Control
1. Rotate the knob to turn receiver On or Off and to
adjust its volume.
2. You can turn your TV speaker to Low or to Off.
On some TVs, you may need to use your remote
to go into the TV’s Menu to achieve an optimal
audio/speaker setting. Please refer to your TV user
manual for details.
3. To conserve battery power, the receiver will shift into
standby mode if no audio signal is received from the
base (after your TV is turned off) for a period longer
than three minutes. The volume ON/OFF indicator
will be off during this standby time. When audio
signal is received, the receiver will re-activate.
NOTE: If the receiver has hibernated too long and
missed the contacts with the base, rotate the knob,
turn off the receiver and then turn the receiver back
on again to re-sync with the base.
4. Set the Tone Control to a position that enables you to
hear and understand the dialog best.
Pairing Additional Receivers
You can add up to 50 receivers to work with your base.
Each added receiver, must be “paired” with the base
as follows:
• Make sure your new receiver is fully charged.
• Make sure your current base and receiver is working
properly and audio is playing on the receiver.
• Continue the audio playing to the base and receiver.
Volume
Tone Adjustment
Wireless TV Speaker • 7