manualshive.com logo in svg

Snapper FAST-Vac, Operator'S Manual With Setup Instructions, Page: 2 / 24

Share
Download
Snapper FAST-Vac Operator'S Manual With Setup Instructions Download Page 2

Thank you

for purchasing this quality-built Snapper Pro product.

We’re

pleased that you’ve placed your confidence in the Snapper Pro brand. When
operated and maintained according to the instructions in this manual, your
Snapper Pro product will provide many years of dependable service.

This manual contains 

safety information to make you aware of the

hazards and risks associated with this machine and how to avoid them. This
machine is designed and intended to be used and maintained according to the
manual for finish cutting of established lawns and is not intended for any other
purpose. It is important that you read and understand these instructions
thoroughly before attempting to start or operate this equipment.

DATE PURCHASED / FECHA COMPRADA

Briggs & Stratton Power Products Group, LLC.
Copyright © 2008 Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved.

The Snapper Pro logo is a trademark of Briggs &
Stratton Corporation Milwaukee, WI, USA.

Contact Information:

Briggs & Stratton Power Products Group, LLC.
5375 N. Main St.
Munnsville, NY 13409-4003
(800) 933-6175
www.SnapperPro.com 

Summary of Contents for FAST-Vac

























Reviews:

No comments