Snapper 7800440, Parts Manual

Page: 5 / 16

Handles and Controls
Footnotes:
Manual No. 7006486 22" STEEL DECK REAR DISCHARGE
5
Part No Description Item Qty
1 7101068 1 PANEL, Upper Handle, Snapper 21 WBM
2 1960382 2 RIVET, Pop .250 Dia.
3 7100844A 1 BAIL, Pivot Handle
4 7300434A 1 HANDLE, Pivot
5 7023655 1 LEVER, Lock Handle
6 7300526A 1 HANDLE, Lock
7 7026257 1 WASHER, .531 x .781 Wave
8 1716654 1 BOLT, 5/16-18 Shoulder
9 7071921 1 RIVET, Plastic Snap
10 7091601 5 NUT, 5/16-18 Flange Lock, YZ
11 7090669 2 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5
12 7300792A 1 BRACKET, Rotation Limit, RH
13 7300436A 1 BRACKET, Rotation Limit, LH
14 7900067 2 SCREW, 1/4-20 x .55 Torx Self-Tap
15 7300459A 2 HANDLE, Upper, Straight, 22”
16 7023649 2 WASHER, 5/16 Nylon
17 7028488 1 ROPE GUIDE, (1/4-20 thread)
18 7076978 1 NUT, 1/4-20 Hex Nyloc
19 7090361 1 SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
20 7090951 4 NUT, 5/16-18 Large Head Center Lock, Black
21 7301013A 1 HANDLE, Lower
22 7091085 1 BOLT, #10-24 x 1/2” Flat Head Square Neck
23 7102666 1 CABLE, OPC, 22”, Pivot Handle
24 7102665 1 CABLE, Drive, 22”, Pivot Handle
25 7091290 1 NUT, #10-24 Hex Nyloc
26 7090505 2 SCREW, 1/4-20 x 2”, Hex Head Cap, GR 5
27 7090372 1 NUT, 1/4-20 Hex Center Lock
28 7035744 4 KNOB, 5/16-18 Wing (Black)
29 7090391 4 WASHER, 5/16” Internal Tooth Lock
30 7091189 2 BOLT, 5/16-18 x 2” Curved Head Square Neck, GR 2
31 7300669A 1 BRACKET, Lower Handle LH 22” WBM
32 7300668A 1 BRACKET, Lower Handle, RH 22” WBM
33 7091612 2 BOLT, 5/16-18 x 1-1/2” Round Head Square Neck
34 7091811 2 BOLT, 5/16-18 x 5/8” Hex Flange Lock, YZ
35 7091601 2 NUT, 5/16-18 Flange Lock, YZ
36 7024649 1 WIRE TIE, 11 Inch Standard Black Nylon
37 721768 2 CLIP, Cable, Double
Not
for
Reproduction