4
DEALER PRE-SALE CHECKLIST
The following must be accomplished prior sale. Refer to pages 1 - 3 for detailed set-up instructions. Review this
list with purchaser. Check (
✓
) items actually performed and signed on this page.
CUTTING BLADE & MOWER
_____ BLADE RETAINING hardware checked for proper tightness.
_____ BLADE TIP CLEARANCE inside lower edge of mower checked and corrected as needed.
_____ MOWER CUTTING HEIGHT settings checked and adjusted as needed (with tires properly inflated).
_____ MOWER SIDE TO SIDE level checked and adjusted as needed (with tires properly inflated).
_____ MOWER FRONT TO REAR setting checked and adjusted as needed (with tires properly inflated).
PRE-START CHECKS & SERVICES
_____ TIRES checked and inflated to correct pressures.
_____ ENGINE OIL level checked.
_____ FUEL added to tank and system checked for leaks.
_____ BATTERY (not overfilled!) reinstalled and properly connected with red boot over positive terminal.
OPERATIONAL TESTS
_____ CHECK SEAT SWITCH for proper function.
_____ INTERLOCK SYSTEMS checked for proper function.
_____ ENGINE STARTED and throttle control settings checked.
_____ ALL OPERATIONS as listed on console checked.
_____ IGNITION SWITCH checked to insure engine stops when turned to OFF position.
_____ PARKING BRAKE tested to insure proper operation.
_____ BLADE BRAKE function verified. Blade rotation stops in 5 seconds or less.
DEMONSTRATION & INSTRUCTION
_____ DEMONSTRATED proper operation of mower to purchaser.
_____ INSTRUCTED purchaser to read and follow instructions in Operator's Manual.
_____ PERSONALLY HANDED Operator's Manual to purchaser.
_____ ASSISTED purchaser in completing Product Registration cards.
DEALER'S RECORDS
SALE DATE
TRACTOR MODEL
SERIAL NO.
Dealer's Name
Signature
Address _________________________ City
State
Zip
TRACTOR WILL BE USED COMMERCIALLY? YES _________ NO
Purchaser's Name
Signature
Address _________________________ City
State
Zip
IMPORTANT: This form is to be retained by the Dealer for future reference regarding Warranty, proof of
purchase, traceability for product recall or service, etc. Complete the SNAPPER Product Registration Card
immediately and mail to: Snapper’s Product Registration Center, P.O. Box 1379, McDonough, Georgia 30253.
INSTRUCTION No. 7-4375 (I.R. 2/15/01)
