background image

Not for 

Reproduction

20

www.SnapperPro.com

When and How Often to Mow

The time of day and condition of the grass greatly affect the 

results you’ll get when mowing. For the best results, follow 

these guidelines:
 1.  Mow when the grass is between three and five inches 

high.

 2.  Mow with sharp blades. Short clippings of grass one 

inch or shorter decompose more quickly than longer 

blades. Sharp mower blades cut grass cleanly and 

efficiently, preventing frayed edges which harm the 

grass.

 3.  Mow at time of day when the grass is cool and dry. 

Late afternoon or early evening often provide these ideal 

mowing conditions.

 4.  Avoid mowing after rain or even heavy dew, and never 

mulch when the grass is wet (moist grass does not 

mulch well, and clumps beneath the mower deck).

Mowing Patterns

Always start mowing on a smooth, level area.
The size and type of area to be mowed will determine the 

best mowing pattern to use. Obstructions such as trees, 

fences and buildings, and conditions such as slopes and 

grades must also be considered. 
 1.  Cut long straight strips overlapping slightly.
 2.  Where possible, change patterns occasionally to 

eliminate matting, graining or a corrugated appearance.

 3.  For a truly professional cut, mow across the lawn in one 

direction, then recut the lawn by mowing perpendicular 

to the previous cut.

Note: Always operate the engine at full throttle 

when mowing. 

If you hear the engine slowing down, you are mowing 

too fast—using a slower ground speed will improve the 

cutting efficiency of the blades and prevents many common 

cutting problems. Use an appropriate ground speed for the 

thickness and height of the grass you are cutting (3rd gear 

or slower for manual gear models). If you hear the engine 

slowing down you are mowing too fast, use a slower ground 

speed. 

Mowing Methods

Proper Broadcast Mowing

Broadcasting, or side-discharging, disperses fine clippings 

evenly over the entire lawn.  Many golf courses use this 

method. Your mower has a deep dish deck to allow freer 

circulation of clippings so they are broadcast evenly over the 

lawn.

Engine Speed & Ground Speed for Broadcasting

Always operate the engine at full throttle when mowing.  If 

you hear the engine slowing down, you are mowing too 

fast—using a slower ground speed will improve the cutting 

efficiency of the blades and prevents many common cutting 

problems. 
ALWAYS use an appropriate ground speed for the thickness 

and height of the grass you are cutting (3rd gear or slower 

for manual gear models). If you hear the engine slowing 

down you are mowing too fast, use a slower ground speed.

How Much Grass to Cut Off When Broadcasting

Mow when the grass is 3-5 inches long.  Do not cut the 

grass shorter than 2 to 2-1/2 inches.  Do not cut off more 

that 1 inch of grass in a single pass

Where possible, make one or two passes around the 
outside of the area discharging the grass INTO the 
lawn to keep the cut grass off fences and walks.

The remainder of the mowing should be done in the 
opposite direction so that the clippings are dispersed 
OUT onto the area of lawn previously cut.

Operation

Summary of Contents for 5900528

















































Reviews: