Not for
Reproduction
12
www.SnapperPro.com
Features & Controls
Power Take Off (PTO) Switch
The PTO switch engages and disengages the mower.
Pull UP on the switch to engage, and push DOWN to
disengage.
Ignition Switch
The ignition switch starts and stops the engine, it has
three positions:
OFF
Stops the engine and shuts of the
electrical system.
RUN
Allows the engine to run and
powers the electrical system.
START
Cranks the engine for starting.
NOTE: Never leave the ignition switch in the RUN
position with the engine stopped–this drains the
battery.
Hour Meter
The hour meter measures the number of hours the
PTO has been engaged. The hour meter has a self
contained power source so the total hours are always
visible.
Fuel Shut Off Valve
Turning the handle to the desired position determines
which tank will be supplying fuel. With the handle
pointing LEFT, it will draw fuel from the left-hand tank.
With the handle pointing RIGHT, it will draw fuel from
the right-hand tank. With the handle pointing towards
the engine, it will shut off fuel flow to the engine.
Instrument Control Panel - S/N:
2016499706 & Below:
A
B
F
D
C
E
Instrument Control Panel - S/N:
2016499707 & Above:
A
B
F
D
C
E
A
Throttle Control
B
Choke
C
Power Take Off (PTO) Switch
D
Ignition Switch
E
Hour Meter
F
Fuel Shut Off Valve (Models w/ Two Fuel
Tanks Only)
Throttle Control
The throttle controls engine speed. Move the
throttle forward to increase engine speed and back
to decrease engine speed. Always operate at FULL
throttle.
Choke
Close the choke for cold starting. Open the choke
once the engine starts. A warm engine may not
require choking. Pull the knob UP to close the choke.
Push to knob DOWN to open the choke.