background image

2

Operator Safety

Operating Safety

Congratulations on purchasing a superior-quality piece of lawn and 
garden equipment.  Our products are designed and manufactured to meet 
or exceed all industry standards for safety.  

Do not operate this machine unless you have been trained. Reading and 
understanding this operator’s manual is a way to train yourself.

Power equipment is only as safe as the operator.  If it is misused, or 
not properly maintained, it can be dangerous!  Remember, you are 
responsible for your safety and that of those around you.  

Use common sense, and think through what you are doing.  If you are 
not sure that the task you are about to perform can be safely done with 
the equipment you have chosen, ask a professional: contact your local 
authorized dealer.

Read the Manual

The operator’s manual contains important safety information 
you need to be aware of BEFORE you operate your unit as well 
as DURING operation.  

Safe operating techniques, an explanation of the product’s 
features and controls, and maintenance information is 
included to help you get the most out of your equipment 
investment.  

Be sure to completely read the Safety Rules and Information 
found on the following pages.  Also completely read the 
Operation section.

Children

Tragic accidents can occur with children.  Do not 
allow them anywhere near the area of operation.  
Children are often attracted to the unit and mowing 
activity.  Never assume that children will remain 
where you last saw them.  If there is a risk that 
children may enter the area where you are mowing, 
have another responsible adult watch them.

Operator Safety

Safety Rules and Information

Not 

for  

Reproduction

Summary of Contents for 400Z Series

















































Reviews: