11
Section 2 - OPERATING INSTRUCTIONS
2.4 STOPPING - ENGINE, WHEEL DRIVE, BLADE
2.4.4. PARK
BRAKE
1. Engage park brake by depressing clutch/brake
control pedal fully and pivot pedal forward to the locked
position. Do not park machine on slopes. See Figure
2.14.
WARNING
DO NOT park machine on slopes.
FIGURE 2.14
2. Release park brake by pushing down on the
clutch/brake pedal and rotate pedal rearward to the
unlock position and release the pedal. See Figure
2.15.
FIGURE 2.15
2.5. CUTTING HEIGHT ADJUSTMENT
1. Adjust cutting height using cutting height
adjustment lever. Depress latch release button located
at the tip of the cutting height lever and move lever to
desired cutting height. Release latch button. Try to
move cutting height lever to ensure latch is fully
engaged. See Figure 2.16.
FIGURE 2.16
CLUTCH/BRAKE
PEDAL
DEPRESS PEDAL FULLY &
PIVOT FORWARD TO LOCK
POSITION. PARK BRAKE IS
NOW ENGAGED.
LATCH RELEASE
BUTTON
HIGHER
CUTTING
HEIGHT
LOWER
CUTTING
HEIGHT
CUTTING
HEIGHT
ADJUSTMENT
LEVER
CLUTCH/BRAKE
PEDAL
PUSH DOWN & ROTATE
PEDAL REARWARD TO
RELEASE PARK BRAKE.
Summary of Contents for 381451HBVE
Page 29: ...29 PRIMARY MAINTENANCE ...
Page 30: ...30 PRIMARY MAINTENANCE ...
Page 31: ...31 PRIMARY MAINTENANCE ...
Page 32: ...32 PRIMARY MAINTENANCE ...
