background image

2

Safety Rules & Information

Operating Safety

Congratulations on purchasing a superior-quality piece of
lawn and garden equipment.  Our products are designed
and manufactured to meet or exceed all industry
standards for safety.  

Power equipment is only as safe as the operator.  If it is
misused, or not properly maintained, it can be dangerous!
Remember, you are responsible for your safety and that
of those around you.  

Use common sense, and think through what you are
doing.  If you are not sure that the task you are about to
perform can be safely done with the equipment you have
chosen, ask a professional: contact your local authorized
dealer.

Read the Manual

The operator’s manual contains important safety information you need to be
aware of BEFORE you operate your unit as well as DURING operation.  

Safe operating techniques, an explanation of the product’s features and
controls, and maintenance information is included to help you get the
most out of your equipment investment.  

Be sure to completely read the Safety Rules and Information found
on the following pages.  Also completely read the Operation section.

Children

Tragic accidents can occur with children.  Do not allow
them anywhere near the area of operation.  Children are
often attracted to the unit and usage activity.  Never
assume that children will remain where you last saw them.
If there is a risk that children may enter the area where you
are operating, have another responsible adult watch them.

Summary of Contents for 1694678



























Reviews: