52
|
Quick Start Guide
|
53
Laser Engraving and Cutting
1. Remove the engraved material.
Place a piece of white and blank
paper (no less than 150mm x
150mm) on the center of the laser
engraving/cutting platform, then
fix it.
4.2.2 Calibrate the Camera
Guides & Pictures
/ Snapmaker
Remove the engraved paper, then fix another provided material on the center of the laser engraving/cutting
platform.
If you need to fix thick materials, refer to
5.2.1 Fix the Material.
You can also fix materials using other tools.
Make sure the clamp set will not collide with any portions of the machine.
4.2.3 Fix the Material
Guides & Pictures
/ Snapmaker
2. Tap
Start
, the machine will use the engraved square to calibrate the camera.
If you have detached the laser module from the X axis, or if you have reassembled the
machine, please recalibrate the camera: swipe left on the home page of the touchscreen ->
select
Settings
-> tap
Laser
-> tap
Camera Calibration
.
Summary of Contents for A150
Page 1: ......
Page 10: ...12 Quick Start Guide 13 Machine Assembly MACHINE ASSEMBLY ...
