The Snap-on® Cloud
Registration - Getting Started
204
17.3.1 Snap-on Cloud - New User Registration
z
If you are a new user, follow these steps to register and create a new
account:
NOTE
If you are a Shop Key Pro or SureTrack user, see
1.
Connect the diagnostic tool to a Wi-Fi network, see
2.
From the Home screen, select
System Settings
>
Get Connected
, and write
down the Serial Number, PIN and Code that are displayed (
).
Figure 17-1
NOTE
The PIN and Code numbers will change each time you view the Get
Connected screen
).
This is normal, any displayed set of PIN and
Code numbers may be used to register.
3.
Select the weblink (
) to open the Login page.
4.
Select
Create Individual Account
.
5.
Enter the required information and create a
Username
and
Password,
then
select
Create
.
6.
At the “Success” confirmation screen, select
Done
.
7.
Log in using your
Username
and
Password
.
8.
Answer the security questions, then select
Submit
.
9.
From Technician Profile Manager select the
Device Management
tab.
10.
Select
Add Device
, then enter your
Serial Number
,
PIN
,
Code
, and Device
Name and select
Save
when done.
11.
Log out of Profile Manager and close the window.
12.
Turn the diagnostic tool off, and then on (reboot).
13.
To login and use the Snap-on Cloud, see
Your diagnostic tool is now registered to your Snap-on Cloud online account. Files
will be automatically sent (only when connected to Wi-Fi) to your online account from
the device.
NOTE
If the device is not connected to a Wi-Fi network, files will not be sent to your
Snap-on Cloud account. Wi-Fi connection is required to upload files to
the Snap-on Cloud.
Device details...
Serial Number:
XXXXXXXXXXXXX
PIN Code:
XXXXXXX
Activation Code:
XXXXXXXXX
