The Snap-on® Cloud
Registration - Getting Started
205
17.3.2 Snap-on Cloud - ShopKey Pro or SureTrack User
Setup
z
If you already have a ShopKey Pro or SureTrack account, follow these
steps to register and setup your Snap-on Cloud account:
From a PC or mobile device:
1.
Connect the diagnostic tool to a Wi-Fi network, see
2.
From the Home screen, select
System Settings
>
Get Connected
, and write
down the Serial Number, PIN and Code that are displayed (
).
Figure 17-2
NOTE
The PIN and Code numbers will change each time you view the Get
Connected screen
).
This is normal, any displayed set of PIN and
Code numbers may be used to register.
3.
Select the weblink (
) to open the Login page.
4.
Select
Login
(upper right screen).
5.
Log in using your ShopKey Pro or SureTrack
Username
and
Password
.
6.
Open the
Profile Manager
(additional login may be required).
7.
From the
Device Management
tab, select
Add Device
.
8.
Enter your
Serial Number
,
PIN
,
Code
, and
Device Name
.
9.
Log out of Profile Manager and close the window.
10.
Turn the diagnostic tool off, and then on.
11.
To login and use the Snap-on Cloud, see
Your diagnostic tool is now registered to your Snap-on Cloud online account. Files
will be automatically sent (only when connected to Wi-Fi) to your online account from
the device.
NOTE
If the device is not connected to a Wi-Fi network, files will not be sent to your
Snap-on Cloud account. Wi-Fi connection is required to upload files to
the Snap-on Cloud.
Device details...
Serial Number:
XXXXXXXXXXXXX
PIN Code:
XXXXXXX
Activation Code:
XXXXXXXXX