Snap-On VERUS, User Manual

Page: 99 / 188

89
Scope Multimeter Getting Started
Channel 3 Lead
Figure 8-3
Blue Channel 3 lead
The non-shielded blue lead ( Figure 8-3 ) is used for either Channel 3 or Digital Meter minus (–).
The lead color matches the color of socket 3 on the diagnostic tool, as well as the color of trace 3
on the test screen.
Channel 4 Lead
Figure 8-4
Red Channel 4 lead
The non-shielded red lead ( Figure 8-4 ) is used for either Channel 4 or Digital Meter plus (+). The
lead color matches the color of socket 4 on the diagnostic tool, as well as the color of trace 4 on
the test screen.
Alligator Clips
Figure 8-5
Alligator clip
Four insulated alligator clips are included and colored to match each test lead, a black clip for the
common ground lead is also supplied (
Figure 8-5 ). Each clip plugs into the straight end of a
channel lead.
Test Probes
Figure 8-6
Test probe
Two test probes are included, one black and one red ( Figure 8-6 ) and plug into the straight end of
the test leads.