174
Maintenance
Cleaning and Inspecting the Diagnostic Tool
5. Select
OK
to close the Calibration Options dialog box.
6. Select the
Calibration Target
to begin the calibration process.
7. As targets appear on the screen, select the center of the target with the tip of the stylus. Hold
the stylus on the target until the release instruction appears.
8. Select
Accept
to save the settings after selecting all of the targets.
9. Select
Apply
to implement the new settings.
10. To make additional adjustments, select other tabs and follow the screen instructions.
11. Select
OK
to close the Control Panel dialog box.
IMPORTANT:
If the touch screen is severely out of calibration use a USB mouse, rather than the stylus, to
perform the calibration.
z
To set the touch screen for a right mouse click:
1. From the Windows toolbar select
Start
>
All Programs
>
Hampshire TSHARC Control
Panel
to open the touch screen dialog box.
2. Select the
Click Settings
tab.
3. Select the
Enable Right Click
check box.
4. Set both the
Right Click Area
and
Right Click Delay
sliders to the middle of the bars.
5. Select
Apply
to implement the new settings.
6. Select
OK
to close the Control Panel dialog box.
16.3 Cleaning and Inspecting the Diagnostic Tool
When using the diagnostic tool, make sure to do the following:
•
Check the housing, wiring, and connectors for dirt and damage before and after each use.
•
Inspect the fan filter. Replace the filter if it is torn, severely dirty, or otherwise damaged.
•
At the end of each working day, clean the housing, wiring, and connectors with a clean damp
cloth.
IMPORTANT:
Do not use any abrasive cleansers or automotive chemicals on the diagnostic tool.
16.4 Fan Filter Service
The fan filter should be periodically replaced to ensure an unrestricted source of cooling air to the
diagnostic tool. Replacement intervals vary depending upon tool use and environment, replace as
needed.
z
To replace the fan filter:
1. Clean off any dirt from the area around the filter.
2. Remove the old filter.
3. Install the new filter.
Summary of Contents for VERUS
Page 1: ...User Manual EAZ0061B58A Rev E ...
Page 4: ...iv ...