manualshive.com logo in svg

Snap-On Vantage Ultra, User Manual, Page: 10 / 127

Share
Download
Snap-On Vantage Ultra User Manual Download Page 10

3

Connect-to-PC ...............................................................................................................87
Configure Shortcut Button..............................................................................................88
System Information ........................................................................................................88
Settings ..........................................................................................................................89

Chapter 8: Maintenance .....................................................................................................96

Cleaning and Inspecting the Diagnostic Tool .......................................................................96

Cleaning the Touch Screen ...........................................................................................96

Battery Pack Service ............................................................................................................96

Battery Pack Safety Guidelines .....................................................................................97
Replacing the Battery Pack............................................................................................98
Disposing of the Battery Pack ........................................................................................99

Chapter 9: ShopStream Connect ....................................................................................100

Using SSC (Connecting to your PC) ..................................................................................100
SSC Main Screen ...............................................................................................................101
Image Viewer......................................................................................................................102
Software Upgrades and Updates .......................................................................................103

End User License Agreement ......................................................................................104

Chapter 10: SureTrack Community ................................................................................105

SureTrack - Online Community ..........................................................................................105

Main Topic Links ..........................................................................................................105
Quick Reference ..........................................................................................................105
Finding your SureTrack Authorization Code ................................................................106
Creating a SureTrack Account .....................................................................................107
Logging In (active account) ..........................................................................................111
Logging In with New Authorization Code (active account) ..........................................112
Logging In with New Authorization Code (expired account) ........................................113
SureTrack Features .....................................................................................................115
SureTrack Screens ......................................................................................................116

Summary of Contents for Vantage Ultra
































































































































Reviews:

No comments