Snap-On Thermal Laser, User Manual

Page: 16 / 34

8
Operation Using Laser Spot Temperature Mode
4.5 Using Laser Spot Temperature Mode
Risk of eye injury or impaired vision.
•
Never look or stare into a laser light when it is on.
•
Do not point the laser into the face of someone else.
•
Do not allow children to be in the area of a laser that is in use, or use the laser.
•
Do not point the laser into mirrors, doors, windows, or at reflective surfaces .
Laser light can impair vision and cause eye injury
.
1. To use Laser Spot Temperature mode, press the Down▼ control button repeatedly until
“ Press TRIG to start measurement” is displayed on the screen and the Laser icon displays
in the toolbar ( Figure 4-2 )).
NOTE:
i
The “X” in the laser icon ( Figure 4-2 ) indicates the laser pointer is off. When the trigger is pulled,
the laser pointer turns on and the “X” is not displayed in the icon.
Figure 4-5
2. To take a measurement, pull and hold the trigger to activate the laser pointer.
3. Point the laser at the desired object(s), and read the measurement on the screen (
Figure 4-6 ).
Figure 4-6
4. When the trigger is released, “ Press Y to capture screen ” is displayed onscreen. To save the
screenshot, press the Y button.
5. To take another measurement, press and hold the trigger and repeat the process.
:$51 ,1*
86
° F
4
70
86