8
Target Presets (PSET)
PSET function gives user ability to configure 10 preset target torque or target angle settings, each
with a minimum (target), maximum (over range) and batch count value. PSETs are stored in non-
volatile memory so that they are retained while power is off.
Adding a Torque Preset
1.
From target torque screen, select units of measure.
2.
Press and hold
UNITS
U
button
for 3 seconds.
3.
ADD PRESET confirmation screen is displayed. Highlight
YES
menu selection using
UP
/DOWN
buttons then press
ENTER
button
.
NO
menu selection returns to main menu without adding
a PSET.
4.
MINIMUM TORQUE is target value at which green progress lights, audible alert and vibrator turn
on. Initial MINIMUM TORQUE value is value from target torque screen. MINIMUM TORQUE can
be set to any value within wrench torque range by pressing
UP
/DOWN
buttons. Once
desired target torque value has been set, press
ENTER
button
.
5.
MAXIMUM TORQUE screen is displayed next. MAXIMUM TORQUE is torque value above which
red progress lights turn on. Initial MAXIMUM TORQUE value will be MINIMUM TORQUE plus 4%.
Maximum torque value can be set greater than MINIMUM TORQUE value to 10% above wrench
maximum range by pressing
UP
/DOWN
buttons. Once desired value has been set, press
ENTER
button
.
6.
BATCH COUNT screen is displayed next. Default value is zero. Batch count range is 0 to 99. Press
UP
/DOWN
buttons to increment/decrement batch count. Mode Count increments each
time target torque is reached if a batch count of zero is entered. Mode Count decrements if a
non-zero batch count is entered and resets to batch count value when count reaches zero. Once
desired value has been set, press
ENTER
button
.
7.
PSET target screen is displayed labeled with next available PSET number from 01 to 10.
8.
To enter additional torque presets, repeatedly press
ENTER
button
until target torque screen
is displayed and repeat steps above.
BATCH COUNT
3
ENTER
button
UP/DOWN
buttons
ADD PRESET
YES
NO
ADD PRESET
YES
NO
00
100.0
FT-LB
UNIT
button
held
Target Torque Screen
ENTER
button
UP/DOWN
buttons
UP/DOWN
buttons
ENTER
button
ENTER
button
MINIMUM TORQUE
100.0
FT-LB
MAXIMUM
TORQUE
104.0
FT-LB
PSET 01
03
100.0
FT-LB
Preset Torque Screen
UP/DOWN
buttons
ENTER
button
SET HEAD LENGTH
SHOW DATA
CLEAR DATA
M
CYCLE COUNT
00
M
100.0
FT-LB
CYCLES: 12
CLEAR
M
EXIT
CYCLES: 12
CLEAR
M
EXIT
SET HEAD LENGTH
SHOW DATA
CLEAR DATA
M
CYCLE COUNT
EXIT
SET HEAD LENGTH
SHOW DATA
M
CLEAR DATA
ENTER
button
held
Target Screen
ENTER
button
UP/DOWN
buttons
UP/DOWN
buttons
ENTER
button
ENTER
button
CYCLES: 0
CLEAR
M
EXIT
ENTER
button
Summary of Contents for TECHANGLE
Page 119: ...118 ...
