4 of 18
16. Care must be taken as burns can occur from touching hot parts.
17. Do not operate equipment with a damaged cord, or if the equipment has been dropped
or damaged – until a qualified serviceman has examined it.
18. Do not let cord hang over table, bench or counter or come into contact with hot
manifolds or moving fan blades.
19. If an extension cord is necessary, a cord with a current rating of two times or more
than that of the equipment should be used. Cords rated for less current than the
equipment may overheat. Care must be taken to arrange the cord so that it will not be
tripped over, or pulled.
20. Always unplug equipment from electrical outlet when not in use. Never use the cord
to pull the plug from the outlet. Grasp and pull plug to disconnect.
NOTE: DO NOT ATTEMPT TO OPERATE THE LIFT IF ANY PART IS NOT
WORKING PROPERLY OR IF YOU HAVE NOT READ THE COMPLETE
OPERATING INSTRUCTION MANUAL.
