manualshive.com logo in svg

Snap-On D10, User Manual

Share
Download
Snap-On D10 User Manual Download Page 82

75

Scope Multimeter Operations

Navigation

8.3   Navigation

The following section describes how to navigate the screen interface.

8.3.1  Screen Layout

The screens typically include the following sections (

Figure 8-14

):

•

Scope Multimeter Toolbar—allows you to configure the tool for the type of test and to adjust 
the settings for each channel, or trace.

•

Main Body of the screen—displays test results. Options on the toolbar let you select how 
tests display on the screen.

•

Trace Details—displays trace settings, which can be adjusted or switched through the touch 
screen

•

Record/Playback Control Toolbar—allows you to record and navigate through paused data.

1— Scope Multimeter toolbar

2— Main body

3— Trace Details

4— Record/Playback Control toolbar

Figure 8-14 Scope Multimeter screen layout

Scope Multimeter Toolbar

The Scope Multimeter toolbar is used to set up the tool for testing and to configure the settings for 
each trace. 

Table 8-4

 on page 76 gives brief descriptions of the control buttons on the toolbar:

Summary of Contents for D10















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands