manualshive.com logo in svg

Snap-On D10, User Manual

Share
Download
Snap-On D10 User Manual Download Page 124

117

System Settings Operations

Shop Information

Figure 14-4 Sample Shop Information dialog box

3.

Tap within any of the information fields and the virtual keyboard opens.

4.

Use the virtual keyboard to fill in the Shop Information form.

As an alternative, you can connect a USB keyboard to a USB port on the Display Device and 
use it to enter information into the form.

NOTE:

i

The screen does not scroll. Use the Top and Bottom buttons on the right side of the virtual 
keyboard relocate the keyboard on the screen so that you can complete the form (

Figure 14-5

).

Figure 14-5 Virtual keyboard Top and Bottom buttons

5.

Close the virtual keyboard and review the information once all the fields have been filled in.

6.

Select OK from the toolbar to save the Shop Information, or Cancel to close the Shop 
Information dialog box without saving.

The Shop Information screen closes and the screen returns to the System Settings menu.

Summary of Contents for D10















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands