background image

ered defective parts not subject to normal wear and tear or other exclusions will be

repaired or replaced, at Alltrade's option. During the warranty period, Alltrade will

be responsible for the return shipping charges. Alltrade's repair and/or replacement

of any nonconforming item and/or part thereof shall constitute fulfillment of all obli-

gations to the purchaser. Alltrade shall not be responsible or liable for any expense,

including freight charges, or repairs made outside Alltrade's facility or an Alltrade

designated service, unless expressly agreed to by Alltrade in writing. Under no cir-

cumstances shall Alltrade bear any responsibility for loss of the unit, loss of time or

rental, inconvenience, commercial loss, or consequential damages.

For the location of an Authorized Service Center nearest you, please call customer

service at 1-888-278-8092.

This warranty does not cover parts damaged due to normal wear, abnormal condi-

tions, misapplication, misuse, abuse, accidents, operation, improper storage, or

freight damage. Parts damaged or worn by operation in dusty environments are not

warranted. Failure to follow recommended operating and maintenance procedures

also voids warranty.

DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,

NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS

OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY, USE

OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, OR OTHER

CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE

NOT COVERED BY THIS WARRANTY.

Alltrade will not be liable for the following: labor charges, loss or damage resulting

from improper operation, maintenance or repairs made by other persons; pre-deliv-

ery services such as assembly, oil and lubricants, and adjustment; maintenance

services that are normally required to maintain the product.

The use of other than genuine Snap-On™ Repair Parts will VOID the warranty.

WARRANTY DISCLAIMERS

EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, GUAR-

ANTIES AND/OR REPRESENTATIONS, EXCEPT FOR THE LIMITED WARRANTY

PROVIDED HEREIN, ALL OTHER EXPRESS WARRANTIES, GUARANTIES, AND/OR

REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE(S) REGARDING

THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE

PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF

WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,

WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY

ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE

BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE

AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY

WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR

CAUSE OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER'S

36

1 YEAR LIMITED WARRANTY

Express and Exclusive Limited Warranty to Original Retail Buyer

Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail

purchaser of the accompanying SNAP-ON™ Pressure Washer and no one else all

parts of the product (except those parts referred to below which are specifically

excluded from such warranty (see Exclusions) to be free from defects in materials

and workmanship for a period of one year from the original date of purchase.

SPECIAL WARRANTY NOTE FOR COMMERCIAL OR RENTAL USE:

The above 

warranty for this SNAP-ON™ Pressure Washer shall be effective for only 90 days

from the original date of purchase if this tool is used for any 

COMMERCIAL OR

RENTAL PURPOSE.

The date of purchase shall be the date of shipment to the original purchaser, or the

date the original purchaser took possession, custody, or control of the product,

whichever occurred first. This warranty shall be null and void if the product or any

component thereof is modified or altered. This warranty does not apply to any other

product and/or component thereof manufactured or distributed by Alltrade, and

does not apply to products and/or components thereof designed, manufactured

and/or assembled by others, for which Alltrade makes no warranties whatsoever.

THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THE DESCRIPTION ON

THE FACE HEREOF.

WARRANTY PERFORMANCE

By purchasing this product, purchaser expressly acknowledges and agrees that

their sole and exclusive remedy under this warranty shall be strictly limited to the

repair or replacement of any covered nonconforming items or parts thereof provid-

ed that any such nonconforming item and/or part is promptly returned to an author-

ized Service Center within the applicable warranty period, with a written request by

purchaser to repair and/or replace the nonconforming item and/or part. We recom-

mend that you keep the original product packaging in the event you need to ship the

unit. We suggest the package be insured against loss or in transit damage. When

sending your product, include your name, address, phone number, e-mail address,

dated proof of purchase (or copy) and a statement about the nature of the problem.

Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate

written proof that they are the original purchaser and of the original purchase date.

Parts returned, freight prepaid and insured, will be inspected and, at Alltrade's

option, repaired and/or replaced free of charge if it is found to be defective and sub-

ject to warranty. Alltrade retains the sole discretion to determine whether any item

or part is nonconforming and, if so, whether the item and/or part will be repaired

and/or replaced. If the unit is repaired, new or reconditioned replacement parts may

be used. If Alltrade chooses to replace the product, it may replace it with a new or

reconditioned of the same or comparable design. The repaired or replaced unit will

be warranted under the terms of the remainder of the one year warranty period; cov-

35

Summary of Contents for 870591






















Reviews: