Snap-On Diagnostics DGA 1000, Manual, Page: 41 / 116

Analyzer Screen Display Features
2-9
Language
Select a language for the analyzer display. (Currently only English
is available.)
Date and Time
Use to change or reset the time display in the right-hand upper
corner of the screen.
— To change press ENTER or arrows ( ). Press ENTER
when desired time is obtained.
— Press left arrow ( ) to exit.
✓
Hour is displayed in the 24 hour format in the set time
screen. (i.e.: 1:00 pm = 13)
Standby Mode
The system automatically goes into a standby mode by selecting
the elapsed time (5 min, 15 min, 30 min or 60 min) after the last
key stroke or at the end of measurements. To change press
ENTER and then arrows (
). Press ENTER when desired
option is obtained.
— Select OFF when the automatic Standby mode is not
required. Standby mode can then be manually switched on
by pressing the Standby symbol on the Measurement
Screen.
Figure 2-8
: Settings Screen 2