Snap Fresh BBT-YOR01, User Manual

Page: 15 / 16

15
Blow Mode (Fig.D):
1. Rotate the blow/vac switch(7) to the blow side.
2. Assemble the lower tube(5) with the machine with blow side up.
3. Insert the battery (2) into the base of the machine as shown in Fig. D.
4. Switching the machine on by press the On/Off switch(1) to position 1 or 2.
Vac Mode (Fig.E):
1. Attached the dust bag(6) with the dust ports and rotate the knob clockwise until it is stuck.
2. Rotate the blow/vac switch(7) to the vac side.
3. Assemble the lower tube(5) with the machine with vac side up.
4. Insert the battery (2) into the base of the machine as shown in Fig. E.
5. Switching the machine on by press the On/Off switch(1) to position 1 or 2.
Clean the machine casings regularly with a soft cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt. Remove very persistent dirt using a soft cloth moist-
ened with soapsuds. Do not use any solvents such as gasoline, alcohol, ammonia, etc. Chemicals such
as these will damage the synthetic components.