5. Use and handling of the cordless
electrical power tool
Safety instructions for all
applications
5
■
6. Service
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g)
Use the power tool, accessories and
tool bits, etc.
in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
a)
a)
Charge a rechargeable battery unit
using only the charger recommended
by the manufacturer.
Chargers are often
designed for a particular type of recharge-
able battery unit. There is the danger of
fire if other types of rechargeable battery
units are used.
b)
Only the rechargeable battery units
supplied are to be used with an
electrical power tool.
The use of other
rechargeable battery units may lead to the
danger of injury or fire.
c)
When they are not being used, store re-
chargeable battery units away from
paper clips, coins, keys, nails, screws
or other small metal objects that could
cause the contacts to be bridged.
Short-circuiting the contacts of a recharge-
able battery unit may result in heat damage
or fire.
d)
Fluids may leak out of rechargeable
battery units if they are misused.
If this
happens, avoid contact with the fluid. If
contact occurs, flush the affected area with
water. Seek additional medical help if any
of the fluid gets into your eyes. Escaping
battery fluid may cause skin irritation or
burns.
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries!
Protect the rechargeable battery
from heat, for example from
continuous exposure to sunlight,
fire, water and moisture.
There is
a risk of explosion.
Have your power tool serviced by a quali-
fied repair person using only identical
replacement parts. This will ensure that
the safety of the power tool is maintained.
This power tool is intended for use as
a grinder, sandpaper sander, wire brush,
polisher, milling machine and abrasive
cutting appliance.
Please follow all safety
instructions, instructions, diagrams and
data that you receive with the appliance.
If you do not observe the following instruc-
tions, this can lead to electrical shock, fire
and/or serious injuries.
b)
a)
General safety instructions for grinding, san-
dpaper sanding, working with wire brushes,
polishing, milling and abrasive cutting:
Wear personal protective equipment.
Depending on the application, ensure
that you use full face protection, eye
protection or goggles. If required, use a
dust mask, ear protectors, protective
gloves or special apron to protect you
from grindings and material particles.
Protected your eyes from flying debris
that may be created during certain app-
lications. Dust or filter masks must be
used to filter any dust created by the app-
lication. If you are exposed to loud noise
for any length of time, you may suffer
hearing loss.