Snap Fresh BBT-KP526 User Manual Download Page 5

 1 hour

Attachments (See Fig. B):

2 nylon brush 

3 milling cutters

2 engraving bits

 3

Package contents

1 cordless precision rotary tool

1 battery charger

1 accessories set (79 pieces)

1 plastic case

1 operating manual

Technical details

Model BBT-KP526:

Rated voltage:

12 V   (DC)

Rated idle speed:

n 5000–28000 rpm

Max. disc ø:

max.

Chuck clamping 

range: 

max. ø 1/8  (3

 ø 31/32  (25mm)

.2 mm)

Capacity:

1500 mAh

Battery (integrated):

LITHIUM-ION

Cells:

3

Battery charger XZ1350-1500:
Primary (input):

Rated voltage:

100-240 V~, 50/60 Hz 

(AC)

Rated power 
consumption:

0.8 A

Secondary (output):

Rated voltage:

12 V   (DC)

Rated current:

1.5 A

Charging time:

approx.

Polarity:

General Power Tool Safety 

warnings 

WARNING!

Read all safety warnings and all 

instructions. Failure to follow the 

warnings and instructions may 

result in electric shock, fire and/

or serious injury.

Save all warnings and instructions for 

future reference.

The term "power tool" in the warnings refers 

to your mains-operated (corded) power tool 

or battery-operated (cordless) power tool.

a)

b)

c)

a)

b)

.

1. Work area safety

2. Electrical safety

16
17
18

5 grinding bits

3 sanding drum mandrels

15 grit sanding bands

19
20

21

1 keyless chuck

1 combination spanner

1 grinding wheels

22
23
24

1 screw mandrel

25

1 cutting/drilling guide

26

1 flex shaft

27

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate power tools in explo-

sive atmospheres, such as in the 

presence of flammable liquids, gases 

or dust. 

Power tools create sparks which 

may ignite the dust or fumes.

Keep pets, children and bystanders 

away while operating a power tool.

 

Distractions can cause you to lose control.

Power tool plugs must match the 

outlet. Never modify the plug in any 

way.

 Do not use any adapter plugs with 

earthed (grounded) power tools. Unmo-

dified plugs and matching outlets will 

reduce risk of electric shock.

Avoid body contact with earthed or 

grounded surfaces, such as pipes, 

radiators, ranges and refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded.

Summary of Contents for BBT-KP526























Reviews: