MACHINE INFORMATION
Intended use
The machine is intended for sawing wood, plastic and metal while keeping the baseplate resting
firmly on the workpiece.
It is suitable for straight and curved cuts. It is also possible to cut
ush to the
workpiece surface. A suitable saw blade must always be used.
16.844 m/s
2
K=1.5 m/s
2
Vibration ‘sawing plywood’
18.067 m/s
2
K=1.5 m/s
2
7
SAFETY WARNINGS FOR CHARGER
Intended use
Charge only BBT-DC20A and BBT-DC40A type rechargeable Battery packs with the charger. Other
types of batteries may burst causing personal injury and damage.
•
•
•
•
The appliance is not to be used by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction.
Children being supervised not to play with the appliance.
Do not recharging non-
rechargeable batteries!
During charging, batteries must be placed in the well ventilated area!
Electrical safety
Always check that the voltage of the power supply corresponds to the voltage on the rating
plate.
•
Do not use the machine if the mains cable or the mains plug is damaged.
•
Only use extension cables that are suitable for the power rating of the machine with a minimum
thickness of 1.5mm .
If you use a extension cable reel, always fully unroll the cable.
2
TECHNICAL SPECIFICATIONS
Model No.
BBT-JOL01
Rated voltage
20V
No load speed
0-3000/min.
Saw stroke
Max. saw capacity wood
Max. saw capacity metal
22mm
100mm
10mm
Weight
1.57kg
Sound pressure level L
PA
82.2 dB(A), K=3dB(A)
Sound power level L
WA
93.2 dB(A), K=3dB(A)
Vibration ‘sawing wooden beam’
Model Number
BBT-DC20A
Battery Type
Lithium-Ion
Voltage
20V
Capacity
2.0 Ah
Recommended charger
BBT-YFT20V
Weight
0.3 kg
Model Number
BBT-YFT20V
Charger input
100-120V~60Hz 65W
Charger output
21V
2.5A
Charging time 2Ah battery 60 minutes
Charging time 4Ah battery 120 minutes
Recommended batteries
BBT-DC20A, BBT-DC40A
Weight
0.36 kg
