When mounting the saw blade, wear protective gloves. Danger of injury when touching the
saw blade.
Only use saw blades that correspond with the characteristic data given in the operating
instructions.
12
•
•
•
•
Charging the battery with the charger (Fig. G)
Take the battery (4) from the machine.
Turn the battery (4) to upside down position and slide it onto the charger (15) as shown in Fig. G.
Push the battery until it is fully pushed into the slot.
Plug the charger plug into an electrical outlet and wait for a while. The LED indicators on the
charger (16) will lighten up and show the charger status.
The charger has 2 LED indicators (16) which indicate the status of the charging process:
Red LED Status
Green LED status
Charger status
Off
Off
No power
Off
On
Standby mode:
-
No battery is
inserted or,
-Battery inserted
but charging has
fi
nished
On
Off
Battery charging in
progress
• Fully charging the 2Ah battery may take up to 60 minutes.
•
Fully charging the 4Ah battery may take up to 120 minutes.
After the battery is fully charged remove the charger plug from the outlet and remove the battery
from the charger.
When the machine is not being used over a longer period of time it is best to store the battery
in charged condition.
Replacing the saw blade (Fig. A, C)
