NECK
FULL
SPOT
VIBRATION
HEAT
TIMER
DEMO
BACK
5
Controller Instructions
NOTE: When ON/OFF button is pressed for first-time use, the massage mechanism will
automatically move to the lowest position before starting a massage program. The massage
mechanism will always return to this lowest position after the device has been turned off.
If electrical supply is interrupted, the mechanism will revert to the lowest position when
power is restored.
Shiatsu Area Buttons:
Select NECK BACK or
FULL to designate the
area covered by the
shiatsu massage.
Spot Button:
Press to keep the shiatsu function
in one area. Use the arrow buttons
to adjust the position up or down.
Vibration Button:
Press to activate the seat
vibration. You may cycle
through low, medium,
high, and off settings.
Heat Button:
Press to activate heat. The
heat can not be turned on if
the massage function is not
activated.
Timer Button:
Press to set the massage
time at 5, 10, or 15
minutes.
Demo Button:
Quick demonstration of the
different functions. The L.E.D.
lights will blink to indicate the
active functions. Once
complete, the device will
automatically turn off.
Note : While Demo function be
activated, the other functions
can not be turned on.
Power Button:
Press to turn the device on and off.
NOTE: When the power button is
pressed to turn the device off, L.E.D.
lights will blink while the rollers return
to the lowest position.