3
Setup and Operation
1. Attach the massager to a chair with elastic straps or place it on other support.
2. Connect the adapter cable to the corresponding cable on the cushion.
Note:
3. Plug the home adapter into an electric outlet
4. Turn on the device using the controller (instructions on page 5).
5. When finished place the controller in the pouch at the side of the seat
cushion and unplug the adapter from the outlet or receptacle.
•
Do not setup or use the massager in a bathroom or similary wet/damp areas
as such an environment may reduce the lifespan of the massager mechanism.
•
Ensure the massager is not exposed to direct sunlight or placed near sources
of heat.
This product produces a warming heat. It is not intended to be used as a
therapeutic heating pad. Please allow a few minutes to reach maximum
temperature. The cushion reaches a maximum temperature of 124F after
approx. 5 minutes.
