SMT 2000REY, Service Manual, Page: 2 / 20

2
SMT WARRANTY – LIMITED Effective June 23, 2017
Parts – Spray Master Technologies warrants parts for wall mounted and rack mounted 600 series and 2000 series units to be free
from defects in material or workmanship for a period of 2 years from the date of shipment from the factory excluding items listed
below.
Spray Master Technologies warrants parts for all other units (wall mounted 1100 series and all portable units) to be free from
defects in material or workmanship for a period of 1 year from the date of shipment from the factory excluding items listed below.
This warranty is limited to the original purchaser and includes repairing or replacing parts which manufacturer’s investigation
shows to be defective at the time of shipment from the factory. All parts subject to this warranty shall be returned F.O.B. Spray
Master Technologies, Rogers, Arkansas for examination, repair, or replacement.
Excluded Items – The follow items are excluded: spray guns, wands, hoses, nozzles, Hummer Jet Sr & Jr, casters and handles. These
items are covered by the above warranty for 90 days from the date of purchase for defects in materials or workmanship.
Labor and Travel – Labor and travel to repair or replace defective parts shall be covered for a period of 1 year from date of
shipment (90 days on the excluded items).
Items Voiding Warranty – The following voids all warranty claims on Spray Master Technologies products: Accidental breakage;
abuse; misuse; failures caused by incorrect installation (if not factory installed); failure to correctly wire the system at the electrical
source; chemical or mineral buildup in the pumps and water lines caused by untreated or unfiltered tap, hard, or recaptured
water; excessive hot water temperatures exceeding 120° Fahrenheit (49° Celsius); using bleach as an injected chemical; injecting
harsh or corrosive chemicals in non-compatible equipment.
www.spraymastertech.com
Phone: (479) 636-5776 • Fax: (479) 636-3245 • 115 E. Linden • Rogers, Arkansas 72756 USA
SMT-WARRANTY-Rev 1-170623-EN Specifications are subject to change without notice Printed in the U.S.A.
Returned Goods Policy
Any item returned for warranty consideration or for credit must
have a RETURN AUTHORIZATION NUMBER . Call our Customer
Service Department and discuss the nature of your request.
Please note that all items returned must be returned F.O.B. Rogers,
Arkansas. No collect or C.O.D. shipments will be accepted unless
prior arrangements with our Customer Service Department have
been made. A restocking fee may be applied to items for credit that
are not under warranty. To reach our Customer Service Department
call (800) 548-3373 or (479) 636-5776 , or write to Spray Master
Technologies, 115 E. Linden Street, Rogers, Arkansas 72756.
Receiving
Damage:
Report any damage to the shipping carton or contents
to the freight carrier. File a claim with the carrier within 10 days if
damage is evident. The manufacturer is not responsible for damage
to the equipment caused by the freight carrier.
Package Contents:
Carefully check the contents of the shipping
cartons to ensure the contents agree with the packing list. If items
are missing or if you have any questions, please call our customer
service department at
(800) 548-3373
or
(479) 636-5776
.
Table of Contents
Receiving 2
Returned Goods Policy
2
Warranty 2
Service 3
Service Requirements
3
Express Service Program 3
Model Identification 3
Theory of Operation - Mechanical 4
Theory of Operation - Electrical 5-8
Wiring Diagram 7-8
Central System Diagnostic Chart 9-11
600REY / WCY Parts Breakdown / List 12
2000REY Parts Breakdown / List 13
Recess Mount Remote Parts Breakdown / List 14
Surface Remote Parts Breakdown / List 15
Spray Gun Parts Breakdown / List 15
Hummer Jet Jr. Parts Breakdown / List 16
Hummer Jet Sr. Parts Breakdown / List 17
SMT-300HDR Parts Breakdown / List 18