DPLL
MIN ~ MAX
(A total of 15 kinds, the default is 5 kinds. The larger the number is, the stronger the range
to adapt to jitter, and the smaller the number, the better the performance against clock jitter.)
This DPLL setting is a special function of ESS series products. It can adjust the internal
DPLL digital phase locked loop circuit Bandwidth, so that the chip achieves a balance
between anti clock jitter and input tolerance.
Its function:
When the clock stability of the input signal is good, this value can be reduced,
so that the clock performance of the system is better;
When the clock stability of the input signal is not good, the sound may be interrupted.
Increase this value can avoid the sound interruption! Especially when using TV
as signal source!
FN KEY FOR
Switch XLR/RCA
ALL Outputs
Bluetooth
There are 9 sound color settings in SU-8s.
Rich1
、
Rich2
、
Rich3
Tube1
、
Tube2
、
Tube3
Crystal1
、
Crystal2
、
Crystal3
This setting is usingthe DSP of ES9068AS,to make some different sound color, all of
these settings will not change the frequency response curve.When set to "Standard",
this setting will be bypassed.
SOUND COLOR
Volume control enable or disable.
Vol Fixed : In this mode, volume is fixed on max output level, and the SU-8s will
ignore the volume operations.
Vol Variable: In this mode, volume can be adjust, and make SU-8s a pre-amplifier.
PRE MODE
Summary of Contents for SU-8S
