SMSC MediaLB, Hardware Manual

Page: 8 / 28

MediaLB Analyzer
Hardware Manual
Document Version: V2.0.X-2 Date: 2008-12-17
1.3 Term Definitions
For better understanding of the following sections, this section provides explanations of special terms,
used within this manual.
Term Definitions
Active-Pod Part of the MediaLB Analyzer. It is a small housing that is directly connected to
the MediaLB Debug Header of the DUT. It buffers the MediaLB signals and
transfers them to the MediaLB Monitor without compromising the signal
integrity.
DUT Device Under Test
INIC Intelligent Network Interface Controller
LED Light Emitting Diode
LVTTL Low Voltage Transistor to Transistor Logic
MediaLB Media Local Bus
MediaLB Monitor Part of the MediaLB Analyzer. It formats, processes and buffers the incoming
serial data before for feeding it via USB to the Host PC.
S/PDIF Sony Philips Digital Interface
Trigger A hardware trigger defines when to capture data from MediaLB.
Table 1-1: Term Definitions
Hardware Manual Copyright © 2008 SMSC
Page 8