SMSC MediaLB, Hardware Manual

Page: 22 / 28

MediaLB Analyzer
Hardware Manual
Document Version: V2.0.X-2 Date: 2008-12-17
4.2.1 Pin-Out MediaLB Connectors for 6-pin High Speed MediaLB
Debug Header
The high speed
MediaLB Connector
is of type QTH-020-01-L-D-DP-A (Samtec). It is a 40-pin
connector having a GND stripe in the middle. It is placed on the front side of the Active-Pod. This
connector is used for connecting the Active-Pod by means of an extension connector to the DUT.
The DUT connector should be of type QSH-020-01-L-D-DP-A (Samtec).
MLBSN
MLBSP
MLB
DN
MLBDP
MLBC
KN
MLB
CKP
DUT
De
tec
tion*
)
Pin 1 Pin 3 Pin 5 Pin 7 Pin 9
Pin 11 Pin 13 Pin 15 Pin 17 Pin 19 Pin 21 Pin 23 Pin 25 Pin 27 Pin 29 Pin 31 Pin 33 Pin 35 Pin 37 Pin 39
GND
Pin 2 Pin 4 Pin 6 Pin 8
Pin 10 Pin 12 Pin 14 Pin 16 Pin 18 Pin 20 Pin 22 Pin 24 Pin 26 Pin 28 Pin 30 Pin 32 Pin 34 Pin 36 Pin 38 Pin 40
Table 4-6: 6-pin Active-Pod High Speed – Pin-Out MediaLB Connector
*)
On DUT this pin has to be connected to 3.3 VCC.
4.2.2 Specifications
4.2.2.1 Absolute Maximum Ratings
Parameter Min Max Unit
MediaLB signal voltage -0.4 3.7 V
Operating (ambient) temperature 0 40 °C
Storage temperature -20 85 °C
Table 4-7: Absolute Maximum Ratings
Hardware Manual Copyright © 2008 SMSC
Page 22