7
A
SSEMBLY
I
NSTRUCTIONS
”
S
TEP
5
–
Pedal Assembly
a.
Note:
The Right Pedal (10) has an R stamped on the end of the
pedal shaft.
The Left Pedal (9) has an L stamped on the end of the
pedal shaft.
Assembling the pedals on the wrong side may cause
damage to the product. The left and right sides are
determined from the back of the seated position on the
product, Please see the diagram in step 5.
b.
Right Pedal Assembly: TURN THE PEDAL SHAFT CLOCKWISE
1. NOTE: the pedal shaft of the
Right Pedal (10)
has right
handed threads and is turned
clockwise
into the right crank
arm on the
Main Frame (1)
. Make sure the Right pedal is
completely hand tightened into the right crank arm.
2. Then fully tightened the
Right Pedal (10)
using the wrench tool, turning
clockwise
.
Tighten the Pedal as tight as possible.
c.
Left Pedal Assembly: TURN THE PEDAL SHAFT COUNTER-CLOCKWISE
3. NOTE: the pedal shaft of the
Left Pedal (9)
has left handed
threads and is turned
COUNTER-CLOCKWISE
into left crank
arm on the
Main Frame (1).
Make sure the Left pedal is
completely hand tightened into the Left crank arm.
4. Then fully tightened the
Left Pedal (9)
using
the wrench tool, turning
counter-clockwise
.
Tighten the Pedal as tight as possible.
d. Assembly is now complete; make sure that all parts are fully tightened before you use the equipment.
CAUTION: THE PEDALS MUST BEASSEMBLED TO THE CORRECT SIDES OR THE UNIT. THEY ARE MARKED L & R
ON THE THREADES PORTION OF THE PEDAL. FAILURE TO FOLLOW THE STEPS BELOW MAY CAUSE DAMAGE.
THE LEFT PEDAL IS REVERSED THREADED AND MUST BE FASTENED IN A COUNTER-CLOCKWISE ROTATION
Step a.
Note: At the
end of pedal
shaft are
stamped R
and L for
Right and left
Step 1. Right
pedal- hand
tighten clockwise
Pedal Shaft
Step 2. Use the wrench
to fully tighten
clockwise
Wrench tool
Step 3. Left Pedal-
hand tighten
counter-clockwise
Step 4.
Use the wrench
to fully tighten
counter-clockwise
Pedal Shaft
Right side
Right side
Left side
Left side
Step 1. Right pedal- hand
tighten clockwise
Step 3. Left Pedal- hand
tighten counter-clockwise
Thread the
Right Pedal
(10) Clockwise
onto the right
crank
Thread the
Left
Pedal (9)
Counter-Clock
wise
onto the
left crank
Step 5. Pedal Assembly - Step a, b, c.
