3
“
H
ARDWARE
I
DENTIFICATION
C
HART
”
Unpack the box in a clear area. Use the
List of Hardware
below to check the contents of the hardware kit. This chart is
provided to help identify the hardware used in the assembly process. Place the washers, the end of bolts, or screws on the
circles to check for the correct diameter. Use the ruler to check the length of the bolts and screws.
THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY:
NOTICE:
The length of all bolts and screws except those with flat heads is
measured from below the head to the end of the bolt or screw. Flat head
bolts and screws are measured from the top of the head to the end of the
bolt or screw.
T-HAND SOCKET
WRENCH (17mm)
SOCKET WRENCH
(13mm)
WRENCH (17mm)
PHILLIPS
SCREWDRIVER (6mm)
Meijer.com
